Double power automatic switch | Siwo Product Description: www.jiandq.com
Automatic transfer switch ( ATSE ), is a switch to flatten and logic control in one, no controller is needed, the real mechanical and electrical integration of automatic transfer switch, having a voltage detection, frequency detection, communication interface, electrical, mechanical interlocking functions, can realize the automatic, electric remote, emergency manual control.
Is operated by the logic control board in various logic commands to manage motor, gearbox operation to achieve, motor drives the switch spring energy storage, accelerating mechanism for instantaneous release, rapid on off circuit or circuit, through the visible state to realize safety isolation, greatly improves the electrical and mechanical properties of.
Switch the overall design of the metal shell, firm. Switch control part is a metal shell, a switch casing components using glass fiber unsaturated polyester resin manufacturing, has good dielectric properties, protection capability and reliable operating safety.
Switch used in power supply system of the main power supply and backup power automatic switching between or two load device of automatic conversion and security isolation.
The switch is handsome in appearance, novel, simple, small volume, complete functions, is the ideal choice for different occasions.
The cloth type function:
Type R1: automatic recovery, phase lack detection ( main, preparing the three-phase ), pressure loss detection, fire zero, indicating lamp indicator.
Type R2: since the shots from the complex, phase lack detection ( main, preparing the three-phase ), pressure loss detection, fire zero, indicating lamp indicator.
Type S1: automatic recovery, phase lack detection ( main, preparing the three-phase ), pressure loss detection, fire zero, digital display, parameter setting, modifying, with
Preparation of extended interface. The use of the environment and use
The use of the environment:
The altitude does not exceed 2000 meters
The ambient temperature is not higher than 40 DEG C, not lower than -5 ℃,
Temperature of +40℃, relative humidity of not more than 50,
Due to changes in occasionally the condensation from special measures should be taken
No explosion risk environment
No snow or rain environment